BUV GP ELASTOMERIC2K is a two part acrylic polymer modified elastomeric water proof membrane which consists of BUV GP ELASTOMERIC2K grey powder and BUV GP ELASTOMERIC2K acrylic emulsion. BUV GP ELASTOMERIC 2K can simply be applied by a stiff brush, or trowel to obtain the desired thickness. BUV GP ELASTOMERIC2K provides a seamless, waterproof coating suitable for us in water tanks, reservoirs, swimming pools, roofs and to ensure water tightness.


  • Minimum surface preparation needed
    low labour costs.

  • Super flexibility and elongation.

  • High strength of bond, high adhesive, excellent in
    whole waterproof.

  • Easy application on all kinds of surfaces.

  • Excellent for concrete roof, leaking brick and
    masonry wall.

  • Good resistance to carbon dioxide and
    chloride ion diffusion.

  • Non toxic ideal for potable water tanks

  • Excellent adhesions–bonds to porous and
    non-porous surfaces.

  • Allows water vapor to escape from the structure.

  • Provide foundation protections


BUV GP ELASTOMERIC2K complies with the requirements of the following standards: BS 6920: Part 1: 1988 ASTM C 29 ASTM D 638-02A


The entire surface which is to receive BUV GP ELASTOMERIC2K must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. The support to be treated should be thoroughly wet prior to application.


BUV GP ELASTOMERIC 2K supplied as Part A and PART B part. Part B poured into a clean container. Slowly add the powder to the liquid and mix at (3:1 ratio) using a slow speed drilling machine fitted with a suitable paddle. Do not mix more material that can be used within one hour. The appearance of the coat will be a creamy coat, which can be applied with a brush. Apply the first layer with sufficient. thickness to cover the holes, cracks, etc. The approximate consumption will be 1kg/m2. Allow 3-5 hours apply second coat per pedicular to the first coat. Apply second coats in order achieve the required thickness at an average consumption rate of 700 g - 1Kg/M2. It i s recommended that each coat should be a minimum of 1 mm


BUV GP ELASTOMERIC 2K is supplied in 20 Kg unit as A Part and B Part and it has minimum shelf life of 12 months provided it is stored under cover, out of direct sunlight.