BUV GP BOND GOLD is a high performance polymer modified tile adhesive for fixing almost all types of tiles, such as ceramic wall and floor tiles, terrazzo, quarry/sand stones and marbles in both internal and external condition.
BUV GP BOND GOLD complies with the requirements of the following standards: BS 5980:1980 Type 1 Class AA, A & B BS 1881: Part 207.
Mix BUV GP BOND GOLD in a ratio of 5 to 6 liters of water per 25 kg bag to a uniform lump free consistency. Leave for approximately 5 minutes to allow the resins to completely dissolve. Moisten the supports if necessary, but never the tile .Mixing should be by a forced action mixer. Hand mixing is recommended for small quantities only.
Apply BUV GP BOND GOLD to a uniform thickness of 3 mm to 6 mm on the support to cover the slots on the back of the tiles on an area of not more than 1M² at a time. For horizontal applications a solid bed fix is recommended as well as for heavy duty vertical applications. For other vertical applications use a toothed spatula to com horizontally to remove excess. The trowel should have 6 mm notches at 25 mm intervals center to center. Apply the tile, press it, and smooth out carefully so that the mortar is spread evenly. If the bonding is perfect, the tile will not slide. The joint can be filled with BUV GP Tile Joint. Coverage varies with bed thickness, undulation, porosity of the tile. Average 5 kg/m2 for 3 mm bed thickness is possible.
BUV GP BOND GOLD is available in 25kg /20kg bags and it has a minimum shelf life of 12 months provided it is stored under cover, out of direct sunlight.
Copyright © BUV CHEMICALS, All Right Reserved.
Designed By Techstas Info Solutions
